Heat-Timer® Easy to Install Heating Controls

 


Building owners are already getting some heating bills that are already a bit higher than they would like and according to most, this is going to continue.  Add to that record high fuel prices and some may be regretting not upgrading their boiler management systems soon.

The good news is that advanced heating controls from Heat-Timer® are designed to integrate easily, without wires, into existing buildings in hours, not days. Both small and large building owners can take advantage of the easy installation of either the Genesis, or Platinum  Heat-Timer® heating controls. With such a simple installation it is easy to get up and running, allowing you to save up to 30% on fuel costs for the rest of the winter and every year to come.

In the 5 New York City boroughs there are literally thousands of multi-family dwellings housing millions of residents. Many of those buildings are on the smaller side, housing anywhere from 2 to 20 families. And the vast majority of those were built more than 50 years ago, using single steam or hot water boilers to heat radiators with piping, wiring, and risers buried long ago inside the walls of these buildings.

 

Building owners looking to modernize their heating systems to save on fuel, were often put off by the cost of recommended upgrades, especially when construction costs were factored in. Even heating control and thermostat solutions sometimes required running wires through multiple floors down to the

boiler room, when existing wiring could not support modern device interface requirements, or the wiring simply wasn’t where it needed it to be.

Genesis Was Made For This.

The key to achieving the level of comfort and savings that Heat-Timer Genesis® does, is its use of our proprietary wireless space sensors. By reporting space temperatures in key areas of the building identified by your heating technician, the self-learning algorithms of Heat-Timer Genesis® can actually learn the heating characteristics of your building.

And since the space sensors are wireless and boast extended range, they can simply be hung on a wall inside an apartment and the signal will reach through up to 10 floors to report to the Heat-Timer Genesis® unit. No running wires or setting up wireless repeaters. The sensors don’t even need to be plugged in, they run on two AA batteries and last for 10+ years.

Heat-Timer Genesis® – An Easy Button for Fuel Savings and Installation

Small apartment building owners can finally make an investment in improving their heating systems that doesn’t require them to have a PHD in HVAC, or take out a second mortgage or rip up their beautiful old building. The Heat-Timer Genesis® was made for you.

For the larger buildings of 20 units or more we recommend our tried and true Platinum Heating Controls. The same ease of installation applies to the Platinum controls where wireless sensors make integration into existing buildings a snap. Plus you have internet access anywhere, self learning algorithms that anticipate the unique thermal loss characteristics of your building, Real time alerts, Use with Steam or Hot Water Boilers and fuel savings up to 30%

For ordering information, give us a call or visit our website to learn more: https://www.heat-timer.com/the-genesis/

 

The original blog is available on - https://www.heat-timer.com/heat-timer-easy-to-install-heating-controls/

Comments

Post a Comment

Popular posts from this blog

How Heat-Timer® Controls Can Make Your Building Management System Better

A  Building Management System  (BMS), also called Building Automation System (BAS) is a system that allows building managers to monitor and control a building’s major mechanical and safety systems in one central, easy-to-use application. A BMS can be thought of as a distributed network of building systems supervised and controlled in one central platform. The network of field controllers and other system controllers are distributed throughout the building and communicate to the BMS through a local area network. Field controllers can be general purpose, supplied by the BMS integrator and used for simple applications like lighting control, ventilation fans and building access. With a BMS, these applications can also be separated by zone, floor or other combinations to yield optimal HVAC performance. Field controllers for mission critical systems like fire alarms and heating are specialized and can act independently, as well as under BMS control. The Heat-Timer® Platinum se...
Read more

Water Safety For all Time

Image
Because of regulations put in place after the outbreak of legionnaire’s disease in the 90’s, installation of Domestic Hot Water (DHW) systems were changed for the sake of public safety.  All DHW systems, whether storage based or tankless, must now meet the conflicting requirements of holding DHW at a minimum of 140°F (60°C) to comply with such standards as OSHA Technical Manual Section 3 Chapter 7, to combat Legionella growth, while delivering hot water at a temperature that prevents scalding injuries in sinks and other fixtures. For decades, commercial plumbing installers have embraced a 3 way mixing valve or “tempering valve” as the perfect solution to the dilemma. Early tempering valves were controlled manually with fixed setpoints, but in 2020 we have evolved to using motorized valves under the direction of a standalone electronic control station that adds flexibility, reduces energy use, provides alerts and alarms, and generally improves the safety of any domestic ...
Read more

Heat-Timer’s Wireless Sensor Integration Just got a Big Upgrade

Image
  One of the most appealing parts of the Heat-Timer® Platinum Series is the wireless sensor connectivity that comes with our Building Net internet upgrade. There are thousands of clients who own an original, non-internet capable Platinum Series control and when they upgrade the control with our Building Net internet package they actually get two major elements: An Internet/Mobile ready control – The Building Net upgrade gives any platinum control the ability to be controlled via the internet through a simple browser connection to a web management portal, or via our free mobile app. In either case, reports, alarms, control settings, and real-time monitoring are all at your fingertips, wherever those fingertips may be. Wireless Sensor Integration – You can think of this as the second network access that is enabled by the Building Net upgrade. This internal Long Range network allows you to connect our wireless space sensors to the control, which by reporting temperatures in vari...
Read more