Genesis Heat-Timer ™ – The Rebirth of Energy Savings for Small Building Owners

The Genesis Heat Timer

 

For larger apartment and co-op buildings, Heat-Timer’s Platinum Series Boiler Controls have been the industry leading solution to saving energy for a long time.  Among HVAC professionals the phrase “Why don’t you install a Heat-Timer®” is both a general statement and a brand endorsement in discussions of energy efficiency and boiler room upgrades. 

Smaller apartment buildings of 20 units or less with forward thinking managers have also taken advantage of the Platinum series control.  For some, the cost of the world’s most effective heating control especially in colder climates, was justifiable when considering the money saved on utility bills every month, and the ease of remote monitoring and management that a fully internet enabled platinum control brings.

Right Sizing the Platinum Control for Small Buildings

It turns out that a lightweight version of our Platinum Internet Control is a huge win for small building owners.  With smaller up-front costs, return on investment (ROI) is greatly accelerated for small buildings of 20 units or less.

The Heat-Timer Genesis™ has several parts that make this investment a no-brainer for small building owners and managers:

  1. Same cost savings potential as Platinum Series Controls – Our cutting-edge heating control software with its self-learning capabilities is built into the brain of the Genesis Heat-Timer ™ control.  Most small building owners can expect to save up to 30% on their monthly utility bills*.
  2. Perfectly sized for buildings of 20 units or less – The basic Genesis package comes with 3 pre-programmed sensors but can handle up to 5.  Generally, one sensor is deployed for every four apartments.  Along with the separate outdoor temperature sensor (Outdoor Reset) this allows the control to monitor and anticipate the heating needs of various areas of your building. Think rock solid temperature management everywhere in your building, for the least possible energy consumption.
  3. Ease of Installation – The wireless sensors use the very latest long-range technology.  No wires here. Sensors can be located 9 floors above the Genesis, without a need for repeaters.  Add to that a 10+ year battery life on the sensors, and you have a system that is essentially plug and play.
  4. Ease of Management – The Heat-Timer Genesis™ is fully internet and mobile enabled. Communication between managers and the control can occur in multiple ways.

    • Remote Alarms sent via text message and/or email. Set up thresholds for multiple alarm conditions and get notified before problems happen. 
    • Internet Management Portal – Use any browser to go to our management website to view your entire portfolio of buildings. Drill down to see control settings, alarms, and heating graphs or reports of activity and cycling from the comfort of your couch.
    • Heat-Timer® Mobile App – On the road? Did you get an alarm from a Heat-Timer® control in one of your buildings? Checking things out is a piece of cake by just firing up our app on your phone and drilling into building data. Most parameters impacting boiler operation are modifiable right from our phone app.  Works on iPhone and Android devices, a free download from the app store.

 

Call a Heat-Timer® Rep Today to Talk about the Genesis of Heating Technology

Heat-Timer Genesis™ is shipping today. It’s not too late to get one installed for the upcoming heating season, after all, it’s easy.

* Actual Savings may vary. Monthly savings is dependent on actual number of heating degree days.  https://www.heat-timer.com/

This blog was originally published at https://www.heat-timer.com/genesis-heat-timer-the-rebirth-of-energy-savings-for-small-building-owners/

Comments

Post a Comment

Popular posts from this blog

How Heat-Timer® Controls Can Make Your Building Management System Better

A  Building Management System  (BMS), also called Building Automation System (BAS) is a system that allows building managers to monitor and control a building’s major mechanical and safety systems in one central, easy-to-use application. A BMS can be thought of as a distributed network of building systems supervised and controlled in one central platform. The network of field controllers and other system controllers are distributed throughout the building and communicate to the BMS through a local area network. Field controllers can be general purpose, supplied by the BMS integrator and used for simple applications like lighting control, ventilation fans and building access. With a BMS, these applications can also be separated by zone, floor or other combinations to yield optimal HVAC performance. Field controllers for mission critical systems like fire alarms and heating are specialized and can act independently, as well as under BMS control. The Heat-Timer® Platinum se...
Read more

Water Safety For all Time

Image
Because of regulations put in place after the outbreak of legionnaire’s disease in the 90’s, installation of Domestic Hot Water (DHW) systems were changed for the sake of public safety.  All DHW systems, whether storage based or tankless, must now meet the conflicting requirements of holding DHW at a minimum of 140°F (60°C) to comply with such standards as OSHA Technical Manual Section 3 Chapter 7, to combat Legionella growth, while delivering hot water at a temperature that prevents scalding injuries in sinks and other fixtures. For decades, commercial plumbing installers have embraced a 3 way mixing valve or “tempering valve” as the perfect solution to the dilemma. Early tempering valves were controlled manually with fixed setpoints, but in 2020 we have evolved to using motorized valves under the direction of a standalone electronic control station that adds flexibility, reduces energy use, provides alerts and alarms, and generally improves the safety of any domestic ...
Read more

Heat-Timer’s Wireless Sensor Integration Just got a Big Upgrade

Image
  One of the most appealing parts of the Heat-Timer® Platinum Series is the wireless sensor connectivity that comes with our Building Net internet upgrade. There are thousands of clients who own an original, non-internet capable Platinum Series control and when they upgrade the control with our Building Net internet package they actually get two major elements: An Internet/Mobile ready control – The Building Net upgrade gives any platinum control the ability to be controlled via the internet through a simple browser connection to a web management portal, or via our free mobile app. In either case, reports, alarms, control settings, and real-time monitoring are all at your fingertips, wherever those fingertips may be. Wireless Sensor Integration – You can think of this as the second network access that is enabled by the Building Net upgrade. This internal Long Range network allows you to connect our wireless space sensors to the control, which by reporting temperatures in vari...
Read more