Get Cozy with One Heating Control Supplier – Heat-Timer®
In many organizations,
it’s common practice for IT to standardize equipment. It might seem that this
policy only benefits IT, but everyone in the organization wins. By doing this,
technicians only need to learn to configure and troubleshoot one type of system,
over time familiarizing themselves and improving service. When there is only
one supplier, it reduces compatibility problems that leave two suppliers
pointing fingers at each other, while the technician and users are left without
a solution.
Similarly, large
manufacturers will specify the same brand of equipment in all factories
worldwide. A technician can walk into a factory in Shanghai, Tennessee or
Germany and know how to operate and repair the equipment. Cost savings
discovered in one plant can immediately be used in the other plants, maximizing
efficiency worldwide.
Most building managers
don’t have properties located all over the world, but wouldn’t it make life
easier if an HVAC professional could walk into any building and know how to
operate and repair the heating system? Or learn how to optimize the heating
system in one building and then be able to apply what they learned everywhere?
While every building and every boiler is different, getting cozy with one
heating control manufacturer is possible. Why not then learn the most
versatile, and advanced heating control in the market so that you can be sure
you’ll have a product that works in all kinds of applications both complex and
simple? Heat-Timer® can indeed allow HVAC techs to live the dream, through its
series of Internet
Heating Controls.
Why should you change to a single boiler control
supplier?
Even an experienced
professional can take a long time to configure and optimize an unfamiliar
boiler controller. That is learning time that the contractor or building
manager is paying for. If the contractor only works with that brand of
controller occasionally in one building, then re-learning needs to take place
every season. Any person who occasionally needs to switch between an Android
and Apple smartphone phone knows the time and pain of re-learning.
Perhaps the most
important benefit of standardizing your boiler automation systems around Heat-Timer®
Products, may be economic. Other controllers tell you what they save as
compared to before they were installed but Heat-Timer® self-learning controls
are the only ones in the world that have data showing we can save as much as
20% additional energy costs over an existing boiler outdoor reset based control
system. That’s because our boiler management software “learns” the unique
heating characteristics of your building, its hot spots and cold spots, and can
anticipate how to get acceptable comfort, for the least amount of fuel.
Heat-Timer® has a controller for every heat and hot
water configuration found in a commercial building. Period.
It doesn’t help to
select a single heating controller supplier if they don’t cover all the bases
or just cover them a little. Because we are the industry’s largest and
longest manufacturer of heating controls, our ability to save money on energy
through sophisticated boiler control is unmatched. While some competitors brag
about their 2nd or 3rd generation control, our evolutions are well into the
double digits. Starting in 1937 with the first outdoor reset control.
Whether maintaining
one or ten systems, a building manager needs a control that can handle all the
possible steam heating or hot water configurations within their buildings. You
need centralized management of multiple boilers, multiple boiler rooms, in
multiple buildings. Our Platinum series controls in conjunction with our
BuildingNet website/mobile app, and wireless sensors, were designed for this purpose.
Heat-Timer® Platinum Series controllers can manage steam and hot water boilers
in every configuration, including condensing, non-condensing, staging, and
more, as well as integrated control and monitoring of domestic hot water.
In addition to the
boiler controllers, Heat-Timer® makes pump controllers, electronic tempering
valves and a variety of wired and wireless sensors. All of these components are
engineered and tested by Heat-Timer to work together. Sometimes, it’s good to stay
in the family.
Getting cozy with Heat-Timer® means getting cozy with
BuildingNet
BuildingNet is
the Heat-Timer® control online portal. It allows building managers and HVAC professionals
to monitor and control every aspect of operation from anywhere there is a web
browser. If you’re a phone guy, then download our free mobile app where you can
monitor alarms and sensors throughout your building.
You can stay cozy on
your couch when you get cozy with BuildingNet. Building managers initially
choose Heat-Timer® controls for their energy savings, but the experience of our
remote internet and mobile app management of those controls brings a quality of
life benefit that is just as compelling. The operational benefits are endless.
You just have to live it for a while.
Heat-Timer® means peace of mind
In the end, the
advantage of going with Heat-Timer is peace of mind. No more worrying whether
your control is really saving all the money it could or should be. No more
worrying whether you’ll remember how to adjust the control. No more worrying
that you’ll need a midnight trip to the boiler room to diagnose or fix an issue
with heat in the middle of winter.
Standardizing on one
heating control manufacturer is the right move for your commercial HVAC
business. Cozy up with Heat-Timer®
Contact us today
for more information on your heating control needs. Visit https://www.heat-timer.com/
Original content posted on https://www.heat-timer.com/get-cozy-with-one-heating-control-supplier-heat-timer/
Comments
Post a Comment